R O S E T T A    S T O N E    R E P L I C A S

"The  Rosetta  Stone  of  Replicas"


Handcrafted, Full-Size, 3-D Replica
o f   t h e
Mysterious  Rosetta  Stone







Dr. Freeman's


All photographs on this page copyright 2009 by Daniel Champness II and Rosetta Classic, LLC. All rights reserved.
Email for permission. Hi-rez images for sale.

The Rosetta Stone was actually found during the Napoleonic Egyptian Military Campaign
in 1799, built into the foundation of an older structure on the west bank of the
Nile as Lt. Pierre Bouchard was preparing the foundation for Ft. Julian.

These images are designed to portray the Classic Rosetta model in an artistic manner -- 16" x 24" (on canvas)

C O M P A R E   A L L   O F   T H E S E   R E P L I C A   I M A G E S
  W I T H   T H E   O R I G I N A L   R O S E T T A   S T O N E
~ E X H I B I T E D   A T   T H E   B R I T I S H   M U S E U M ~

Left Side Profile View


Right Side Profile View


Rosetta  Stone  Replicas  ~

R E P L I C A    M O D E L S


2006-NOW Rosetta Classic, LLC. All rights reserved.


 Close-up left hand corner view of replica,
revealing the exquisitely detailed
hieroglyphic inscription and
rose-colored band of granodiorite

NEW: Pedestal Exhibition Base -- 30" x 30"
(hand crafted for each Classic Rosetta model)



Metal piece that attaches the replica to the exhibition base.

Two Front Views of Classic Rosetta Replica From Slightly Different Angles
(45" tall x 30" wide x 11" thick, 95 lbs.)

Left Quarter View

Front View with One of the Three
Exhibition Stand Models being Developed

Right Quarter View

Dr. Joel Freeman with Classic Rosetta Model
(after 4+ years of research...and a lot of help)

Rear View of Replica, Without Stand

Close-up view of Attachment Area (four bolts)
for all Three Exhibition Stand Models

The Classic Rosetta replica has a steel plate
embedded in the resin in the back to allow
for several models of stands to be attached,
covering the resin pour hole in the middle.

You can also see the copyright information and serial
number in the lower left hand corner of this picture.


Classic, Jr Model -- Brand New!
2/3 size (approx 30" tall x 20" wide x 7.5" thick, 25 lbs)
Only one like this in the world.

Classic, Jr. model showcased in the "Guide By Cell" booth
at a recent American Alliance of Museums (AAM) expo



All of the above photos were taken by Dan Champness


   We are recreating the cylinder of the original exhibition base you see in the image above (London Illustrated, 1874), except there will be no square piece at the bottom of the pedestal base.

These exhibition bases will be comprised of a sand-filled, granite-like resin cylinder (about 30" tall x 28" across) -- available only for the life-size, Classic Rosetta models. To the right is a rough visual concepts of the way the Classic Rosetta model will be exhibited.


The Inscription on the Pedestal Base

The Rosetta Stone
Inscription in honor of Ptolemy
Hieroglyphic, Demotic & Greek Characters
Ptolemaic Period
196 B.C.

 This is a modern facsimile
of the original Rosetta Stone
displayed as it was when it first
came to the British Museum

Rough Concept Screen Shot of the
Pedestal Exhibition Base --
by Curt Fluent


HYBRID ROSETTA -- One moment it's a coffee table. The next moment it's fine art for your wall!

Below are two of the three types of stands that can be
attached to the rear of the Classic Rosetta for exhibition:

Pedestal Exhibition Base -- 30" x 30"
(hand crafted for each replica)

View of One of Three
Exhibition Stand Concepts

How this Type of Stand
is Attached to Replica


T H R E E   P L A Q U E   R O S E T T A   M O D E L S

1. Natural Plaque Rosetta -- Front and Side Views ("40" tall x 30" wide x 1/2" thick, approx 15-20 lbs)

2. "Cold Bronze" Plaque Rosetta                                                     3. "Cold Silver" Plaque Rosetta


H Y B R I D   R O S E T T A   M O D E L
Pictured soon...



* * * * * * * *   Eight Unique Innovations of the Rosetta Stone   * * * * * * * *








  (1). CLASSIC ROSETTA:  info/pricing -- Classic Rosetta -- PICTURED ABOVE...available!
       full-size, stunning 3-D replica (approx. 45" high x 30" wide x 11" thick, 95 lbs). This model is the
        most requested - especially for museum, library, educational exhibitions. The coloration will
           be mixed into the resin, for durability & beauty...designed to mimic (as closely as possible)
             the shape and the coloring of the genuine Rosetta Stone. White lettering for ease of reading.

 (2). CLASSIC BRONZE ROSETTA:  info/pricing -- Classic Bronze Rosetta -- available!
       limited edition (only 950) full-size, 3-D cold bronze model (resin & bronze). Black lettering.

 (3). CLASSIC SILVER ROSETTA:  info/pricing -- Classic Silver Rosetta -- available!
       limited edition (only 950) full-size, 3-D cold silver model (resin & silver). Black lettering.

 (4). CLASSIC FINE ART BRONZE ROSETTA:  info/pricing -- Classic Fine Art Bronze Rosetta
       rare, limited edition (only 350) full-size, 3-D "lost-wax" bronze foundry process designed
                for highly valued fine art pieces that are immortalized in like manner  -- in development

      - CLASSIC / BRONZE / SILVER / FINE ART ROSETTA PEDESTAL BASES:  info/pricing -- Exhibition
             30" high x 28" wide base (with iron cradle option) to exhibit replica. (see 2 exhibition concepts below)
                      -- in development stage

(5). BABY ROSETTA:      info/pricing -- Baby Rosetta -- in development stage
        2/3 size, 3-D replica (approx. 30" high x 20" wide x 7.5" thick). Perfect for exhibition in your home.

(6). HYBRID ROSETTA:      info/pricing -- Hybrid Rosetta -- available! (see images above)
      unique, dual-purpose model: unscrew the 4 legs from the coffee table (40" long x 30" wide x 2.5" thick)
          and now you have a beautiful piece of archaeological art to hang on your wall. White lettering.

  (7). BRONZE PLAQUE ROSETTA:      info/pricing -- Bronze Plaque Rosetta
      plaque-like models that are shaped in the distinctive outline of the face of the Genuine Rosetta Stone
        (40" tall x 30" wide x 1/2" thick). Legacy awards that double as archeological wall art, in four models:
           * "Lost-Wax" Plaque Bronze Rosetta (limited edition...only 1,500)  -- in pre-development
              * "Cold Bronze" Plaque Rosetta (with black lettering) -- available!
                 * "Cold Silver" Plaque Rosetta (with black lettering) -- available!
    * Classic Plaque Rosetta (with white lettering) -- available!

(8). HOLOGRAPHIC ROSETTA     info -- Holographic Rosetta -- in pre-development stage.
         we are in the beginning stages of working on an absolutely stunning 3-D digital holographic image of
           the Rosetta Stone that is suspended in mid air. The initial descriptions indicate that there is nothing else
             like it -- to be made available for museum exhibits, special events, etc. An educational jaw-dropper...



Ask about our Classic Rosetta offer for museums, educational institutions, and RSA Conference exhibitors / attendees...



  i. We believe that we are the first and only entity in the world to offer commercially-available, full-size, 3-D replicas of the original Rosetta Stone to potential purchasers for whatever private or public interests they may have. In other words, a potential customer is not required to represent a bona fide museum or educational institution to obtain one of our innovative Rosetta Stone replicas. Our full-size, 3-D replicas are available for purchase by anyone in the general public. This is one of the most compelling aspects of this project, which matches our desire to provide a hands-on experience with a replica of one of the important archaeological artifacts ever discovered...for millions of people.

  ii. We provide a special discount for museums, educational institutions and any other bona fide non-profit organization that desires to use the replica for educational/exhibition purposes (31% off introductory price for Classic Rosetta model). Tell us about your organization (include your website) when you ask for more information.

  iii. We are developing various models to match large or small budgets -- unique innovations that exhibit well in either large or small spaces -- for domestic or more expansive exhibition purposes.

  iv. Once you have selected the model you want to purchase, we can generally ship a replica within 6-8 weeks to any customer, anywhere in the world -- a rather quick turn-around for something of such unusually fine quality...hand-crafted especially for you. These are not "off the shelf" replicas made on some assembly line in China. All replicas are made in the USA.

  v. We provide excellent, world-class customer service before, during and after your delivery. We will respond ASAP to any of your questions via email or phone (410-991-9718). Upon request, customer references are available.

  vi. Here's one of the most exciting features: Our Classic Rosetta models mimic the appearance of the genuine Rosetta Stone (after the original Rosetta Stone was cleaned in 2004). The rose-colored vein of granodiorite that came to light after the 2004 cleaning of the original Rosetta Stone is set in the upper left hand corner of our natural colored, 3-D replicas. This is an extremely difficult aspect of the original Rosetta Stone to duplicate when fabricating a three dimensional piece of art, utilizing rotational casting technology. It is our objective to offer nothing but excellence on every level. You'll see...


Rosetta Classic is not affiliated with the British Museum, which has not endorsed or
sponsored Rosetta Classic, The Freeman Institute Foundation, or the Rosetta Stone replica project.






Pedestal Exhibition Base -- 30" x 30"
(hand crafted for each replica)

Exhibition Pedestal Base Concepts

   We have recreated the cylinder of the original exhibition base you see in the image (London Illustrated, 1874) below, except there will be no square piece at the bottom of the pedestal base. These exhibition bases are comprised of a sand-filled, granite-like resin cylinder (about 30" tall x 28" across) -- available only for the life-size, Classic Rosetta models.

  We also have another exhibition concept (designed especially for mobility...greater ease in shipping  the replica & base to/from trade shows, for instance), attaching the Rosetta Stone replica to a black matte pipe screwed into the bottom at a very slight forward angle.

The other end of the pipe will be screwed into a large granite-like resin base filled with sand -- or a flat piece of steel. We are currently working on the viability/stability of the base concepts and the pricing of the exhibition base ideas. We will also be developing exquisitely framed copies of the 1874 London Illustrated image -->

from The Freeman Institute History Collection

Classic Rosetta, Classic Bronze, Classic Silver, Baby Rosetta and Hybrid Rosetta models (and bases) are being fabricated by Mannetron, utilizing the Rotational Casting technology and will be hollow (about 1/2" thick, with an internal layer of high density foam), so that the shipping cost will be minimized. The foam will also strengthen the walls of each replica.

  The Classic Fine Art Bronze and Bronze Plaque models are being fabricated by a foundry. The Classic "Lost Wax" Bronze Rosetta model will be made of real bronze, using the "lost wax" process that is utilized for highly valued fine art pieces that are immortalized in like manner. These bronze models will be about 1/2" thick and will weigh 3-4 times more than the resin models. Consider developing a "Legacy" or "Lifetime Achievement" Award in your community. A Bronze Rosetta would be the ultimate award, prized by anyone who receives such an honor.

  Even though the main purpose for creating the Rosetta Stone Replicas has been to provide them as educational exhibits for the Black History galleries The Freeman Institute Foundation is developing, there has been substantial interest from individuals and educational entities for purchasing certain models.

  These stunning, museum-quality replicas will be expensive. It has been a long process (4+ years)...bringing this project to the point where we are almost ready to start the fabrication of replicas fit for public exhibition. Ask about discounts, available only for educational institutions, libraries & museums.

  This is not a cheap "Made-In-China" assembly-line replica project. Nor is it a washed-out, flat resin copy of a copy of a copy of a copy of a copy of a copy of the face of the Stone, cast in someone's back yard.

   Each Rosetta Stone replica (fabricated from a 1st-generation facsimile) is individually and lovingly hand crafted by artisans in an expert environment and will be as strong and as durable as a cultured marble-type counter top - 40% resin / 60% granodiorite filler.

  The shipping, handling (including the construction of secure wooden box for transport), and insurance costs will be borne by the buyer. The cost of S&H and insurance will be determined by the final destination to which the replica will be shipped and the least expensive (yet secure) method of shipping via a credible shipper (preferably by air).

  We absolutely guarantee that the replica will be delivered to the shipper in pristine condition. In the unlikely event of damage occurring during shipping...that will be taken up with the shipper's insurance company. The rule of thumb is that the quicker an object like this arrives, the less potential damage. Ground shipping will be the least-viable option.

   Feel free to email us with your thoughts and questions. We look forward to providing full-size, 3-D, museum-quality replicas of the Rosetta Stone very soon. Rosetta Classic, LLC is listed at the American Association of Museum's "Museum Marketplace." All purchases of the Rosetta Stone replicas through Rosetta Classic, LLC will benefit the goals and objectives of  The Freeman Institute Foundation (see more info below), which is directed by Dr. Joel Freeman. Excellence. Satisfaction guaranteed. Period.

  Feel free to take a look at the other Rosetta Stone-related items in The Freeman Institute collection.




Rosetta Stone Replicas
Box 305, Gambrills, Maryland 21054
TEL 410.991.9718     FAX 410.729.0353



Rosetta Stone Replicas Project Domain Names

RosettaStoneReplicas.com   RosettaStoneReplica.com    RosettaRosetta.com
RozettaZone.com    RosettaClone.com    RosettaClassic.com    RosettaStoneCopy.com
Rosetta101.com    BronzeRosetta.com    BabyRosetta.com    RosettaReproductions.com
3Drosetta.com    RosettaCrazy.com    GetARosetta.com    GettaRosetta.com    RosettaMan.com
HybridRosetta.com    ClassicRosetta.com    RosettaStoneMan.com    RosettaFacsimile.com
BlogRosettaStone.com   BlogRosetta.com   RosettaRocks.com

Photo Gallery -- 230 Photos!

2005-NOW Rosetta Classic, LLC

Dr. Freeman's latest book

Hit Counter


"cryptology -- Nile -- archaeology -- basalt -- hologram -- holographic -- language -- translation -- Egyptology -- publish -- artifact -- artefact -- granodiorite -- wall art -- coffee table -- copy"
"Rosetta Stone -- full size -- Egypt -- Jean Champollion -- hieroglyphics -- Cairo -- British Museum -- replica -- facsimile -- copy -- life size -- reproduction -- rare documents -- 3-D -- 3D -- museum -- gallery"